|
|
Our Products - RHIB Installation Kits
$354.19
DFB-CKSER
Data cable from MOBI DF100 & DF101 antenna to display
Includes all parts to assemble and install cable.
Applies to following hulls: 7mRB, 7mRX, 7mRB 2002 OTECH, 11mPL, 36'PL, 5mRB, 11mRB closed, 11mRB open.
Parts include: DB-9 Male & Female, Cable clam, 2X0-6 shielded serial cable 26AWG, epoxy repair kit, waterproof DB9 hood & gasket, DB9 assembly tool, Heat Shrink, Heat Shrink labeling, self-drilling screw, cable tie, cable strap, cable tags, K-Seal wire seal(11mRB closed cabin only), roovers tape
Download the Installation Guide
$325.00
DFB-CKSER5/11MRBO
Data cable from DF100 & DF101 Adcock to display
Includes all parts to assemble and run cable through hull.
Applies to following hulls: 5mRB, 11mRB open.
Parts include: DB-9 Male & Female Connectors; cable clam; 6-Pair Shielded Serial Cable 26AWG; Epoxy Repair Kit; DB9 Hood & gasket, heat shrink, screws, cable tie, cable strap, cable tags, Roovers Tape
Download the Installation Guide
$346.82
DFB-CKSER11MRBC
Data cable from DF100 & DF101 Adcock to display
Includes all parts to assemble and run cable through hull.
Applies to following hulls: 11mRB closed.
Parts Include: DB-9 male and female connectors, cable clams,6-Pair Shielded Serial Cable 26AWG, epoxy repair kit, DB9 hood and gasket,DB9 hood assembly tool, heat shrink, heat shrink labeling, screws, cable tie, cable strap, cable tags, K-Seal wire seal, Roovers Tape
Download the Installation Guide
$245.80
DFB-CKDCL3
Interior Console Power Cable Kit for MOBI DF
Includes all parts to assemble and run cable through console to PDB.
Applies to following hulls: 7mRB, 7mRX, 7mRB 2002 OTECH, 11mPL, 36'PL.
Parts include: 3AG 250V 1A Fuse, LSDSGU cable, in-line fuse holder, heat shrink, label plate, HD ring terminal, labeling heat shrink, moisture-seal polyolefin heat-shrink tubing, hella socket, cable tags, cable strap, screws, nuts, washers, cable ties, epoxy repair kit; Roovers Tape
$216.22
DFB-CKDCLJE
Exterior power cable from MOBI DF100/DF101 display to console.
Includes all parts to assemble cable.
Applies to following hulls: 7mRB, 7mRX, 7mRB 2002 OTECH, 11mPL, 36'PL.
Parts include: LS2SJ-20 cable, label plate, DB-9 Female connector, Hella 4-pole socket & plug connector, waterproof DB9 hood & gasket, DB9 hood assembly tool, epoxy repair kit, heat shrink and fasteners.
$2500.82
DF-DK1001
DF Display Kit
DF Display, DF cover & fasteners for mounting display to display bracket.
Applies to following hulls: 7mRB, 7mRX, 7mRB 2002 OTECH, 11mPL, 36'PL, 5mRB, 11mRB open.
Parts include: ORCA DF10# Display, Label Plate - MOBI, screws, washers, DB9 hood gasket, rubber hood
$2457.82
DF-DK100111MRBC
DF Display Kit
DF Display & fasteners for mounting display to bracket.
Applies to following hull: 11mRB closed.
Parts include: ORCA DF10# Display, Label Plate - MOBI, screws, washers, DB9 hood gasket
$3784.26
DF-AK1001
DF Antenna Kit
DF Adcock, antennas & fasteners for mounting Adcock assembly to small boat mast.
Applies to following hulls: 7mRB, 7mRX, 7mRB 2002
Parts include: ORCA DF10# Array, Flexible DF antenna, screws, washers, Loctite 262 Thread lock, Anti-Seize Compound
$435.21
DFB-M10017MRB
DF Adcock foundation and mounting hardware.
Applies to the following hulls: 7mRB, 7mRX.
Parts include: washers, screws, lock nuts, lock pin w/retainer strap, SS lanyard loop, anodized RHIB DF antenna foundation, anodized 7m & 24' RHIB mast, anti-seize compound DF Antenna Mast/Foundation Kit - 7M RHIB: Aluminum antenna mast, aluminum bracket, locking pin with retainer strap and lanyard, swivel pin, fasteners, Locktite
$293.43
DFB-DB01
DF Display Bracket Kit
DF Display foundation and mounting hardware.
Applies to following hulls: 7mRB, 7mRX, 7mRB 2002 OTECH, 11mPL, 36'PL, 11mRB closed, 11mRB open.
Parts include: anti-seize compound, Epoxy Repair Kit, screws, washer lock nuts, anodized/powerder-coat small boat DF display mount/backing plate, label plate
$435.21
DFB-M10017MRBOT
DF Adcock Antenna foundation and mounting hardware
Applies to the following hulls: 7mRB 2002 OTECH.
Parts include: washers, epoxy repair kit, screws, lock nuts, lock pin with retainer strap, lanyard loop, anodized RHIB DF antenna foundation, anodized 7m & 24' RHIB Mast, anti-seize compound
$785.00
DFB-M100111MPL
DF Adcock Antenna foundation and mounting hardware
Applies to following hulls: 11mPL, 36'PL.
Parts include: epoxy repair kit; lock pin w/ retainer strap, SS lanyard loop, anti-seize compound, screws, washers, nuts, powder-coated gunwale foundation, mast, mast foot, neoprene rubber
$850.00
DFB-M10015MRB
DF Adcock Antenna foundation and mounting hardware
Applies to the following hulls: 5mRB.
Kit includes: screws, washers, lock nuts, lock pin w/ retainer strap, nylon-Coated SS Lanyard Loop-Each End, anodized antenna mast foundation, antenna mast transom brace, anodized antenna mast, anti-seize compound
$250.00
DFB-DB025MRB
DF Display Bracket Kit
DF display foundation and mounting hardware.
Applies to following hulls: 5mRB.
Kit includes: Anti-Seize Compound, washers, Anodized DF Display Mounting Bracket, Hand Rail Shim, Label Plate
$310.00
DFB-CKDC5MRB
Console power cable
Includes all parts to assemble and run cable from display to power panel.
Applies to following hulls: 5mRB open.
Parts include: LS2SJ-20 Cable, red/black 16AWG wire, Label Plates, Heat Shrink, Cable tags and straps, screws, bolts, epoxy, roovers tape, cable ties, DB9 hood, gasket, cable clam, Circuit Breaker, epoxy repair kit
$713.56
DFB-M100111MRBC
DF Adcock Antenna foundation and mounting hardware
Applies to the following hull: 11mRB closed.
Includes screws, washers, nuts, lock pin with retainer strap, SS lanyard loop, anodized antenna mast foundation, anodized antenna mast, and anti-seize compound.
$350.88
DFB-CKDC11MRBC
Console power cable
Includes all parts to assemble and run cable from display to PDB.
Applies to following hulls: 11mRB closed.
Parts include: LS2SJ-20 cable, heat shrink, label plate, labeling heat shrink, cable tags, cable straps, screw, washers, nuts, cable ties, epoxy repair kit, Roovers Tape,DB-9 female connector, DB9 hood, DB9 hood gasket, DB9 hood assembly tool, cable clam; Circuit Breaker
$306.47
DFB-CKDC11MRBO
Console power cable
Includes all parts to assemble and run cable from display to PDB.
Applies to following hulls: 11mRB open.
Parts include: LS2SJ-20 Cable, Label Plates, Heat Shrink, Cable tags and straps, screws, bolts, epoxy, roovers tape, cable ties, DB9 hood, gasket, cable clam, Circuit Breaker
$1038.23
DFB-M100111MRBO
DF Adcock Antenna foundation and mounting hardware
Applies to the following hulls: 11mRB open.
Parts include: bolts, washers, nuts, pipe coupling, stuffing tube, packing assembly, powder-coated antenna mast, antenna mast foundation and GPS mast foundation.
Your Cart: ( items)
|
$354.19
$245.80
$2500.82
$2457.82
$3784.26
$435.21
$293.43
$785.00
$850.00
